Tap to zoom

Heat pump outdoor unit 1-phase EMHP-10V/N8 EEC

Heat pump outdoor unit 1-phase EMHP-10V/N8 EEC

Full description

The design of the device may slightly differ from that presented on the site.

Series

Heat pumps air-water
Inverter technology

yes
Energy efficiency class

A+++
Min. operating air temperature for the outdoor unit

-25 °С
Effective for premises up to

130 m²

Inverter technology

yes
Energy efficiency class

A+++
Min. operating air temperature for the outdoor unit

-25 °С
Effective for premises up to

130 m²

Main

Outdoor unit case color: White
Refrigerant: R32
Min. supported temperature: 5 °С
Max. supported temperature: 65 °С
Min. operating air temperature for the outdoor unit: -25 °С
Indoor unit case color: White
Series: Heat pumps air-water
Warranty period: 2 years

Consumer

Effective for premises up to: 130 m²

Protection and safety

Energy efficiency class: A+++

Ensemble

Set of fasteners included: no
Control panel included: yes

Packaging weight and dimensions

Product weight with packaging (gross): 88 kg

Technologies

Inverter technology: yes

Performance

Nominal heating capacity: 10 kW
Nominal cooling capacity: 10 kW

Mounting

Max. trunk length (route): 30 m
Max. height difference between int. and outdoor units: 20 m
Power consumption in heating mode: 2 W
Power consumption in cooling mode: 2.08 W
Network cable: no
Power supply voltage: 220 - 240 V

Product weight and dimensions

Outdoor unit weight (net): 75 kg
Outdoor unit height: 0.865 m
Outdoor unit width: 1.118 m
Outdoor unit depth: 0.523 m

Data sheet

Product features
- Series
  
  Heat pumps air-water
- Inverter technology
  
  yes
- Energy efficiency class
  
  A+++
- Min. operating air temperature for the outdoor unit
  
  -25 °С
- Effective for premises up to
  
  130 m²
Multifunctional system

Energy Save technology

HWS priority

Holiday Away mode
Key characteristics
- Inverter technology
  
  yes
- Energy efficiency class
  
  A+++
- Min. operating air temperature for the outdoor unit
  
  -25 °С
- Effective for premises up to
  
  130 m²
Product documents
Product documents
All characteristics
Main

Outdoor unit case color: White

Refrigerant: R32

Min. supported temperature: 5 °С

Max. supported temperature: 65 °С

Min. operating air temperature for the outdoor unit: -25 °С

Indoor unit case color: White

Series: Heat pumps air-water

Warranty period: 2 years
Consumer

Effective for premises up to: 130 m²
Protection and safety

Energy efficiency class: A+++
Ensemble

Set of fasteners included: no

Control panel included: yes
Packaging weight and dimensions

Product weight with packaging (gross): 88 kg
Technologies

Inverter technology: yes
Performance

Nominal heating capacity: 10 kW

Nominal cooling capacity: 10 kW
Mounting

Max. trunk length (route): 30 m

Max. height difference between int. and outdoor units: 20 m

Power consumption in heating mode: 2 W

Power consumption in cooling mode: 2.08 W

Network cable: no

Power supply voltage: 220 - 240 V
Product weight and dimensions

Outdoor unit weight (net): 75 kg

Outdoor unit height: 0.865 m

Outdoor unit width: 1.118 m

Outdoor unit depth: 0.523 m

Product information

Technical privilege of EHB-EMHP heat pump system is constructed to deliver exceptional energy efficiency. The appliance is ready to pump 3-5 kW of heat at the cost of 1 kW, which confirms efficiency class А+++ and means more than 500% of value in everyday practice.

DC Inverter technology helps to intellectually control the system work and power. The heat pump quickly and accurately reacts to temperature changes of the coolant or ambient air, optimizing its features to the actual conditions: priority source of hot water supply in the house, additional heating devices, operation according to user set requirements.

High grade of reliability is guaranteed by details and components from well-known manufacturers: modern inverter DC compressor by Mitsubishi Electric, inverter brushless electric motor of DC fan and water circulation pump by Wilo.

You can easily integrate EHB-EMHP into the home heaters’ chain, including up to 6 devices with remote control and separated climate zones. You can also improve the system later, adding new appliances for more independence and features. M-KIT thermostats for precise temperature monitor and climate management all over the house or a mixing station for underfloor heating connection.

Ecology friendly refrigerant R32 used in EHB-EMHP system saves not only financial, but either natural resources. It demonstrates extremely low factor of GWP (Global Warming Potential) - 675 (the average factor is counted – 2088) and absolutely zero factor of ODP (Ozone Depletion Potential).

For even more comfort and safety experience the following features:

Simple touch control
Intuitive LCD-screen with self-diagnostics of operational parameters, error codes display and child lock system.
Wide operation range
The heat pump system is effective from -25°C to +35°C outdoors for heating and from -5°C to +46°C outdoors for cooling. It is capable to heat water up to +65°C.
Really quiet work
This factor is important when the device is on non-stop, day and night. Reliable and smart designed details: low noise inverter pumps and optimized hydraulic circuit – in-house sound from 38 to 43 dB(A), which is compared to the rustle of trees or bird’s wings.
Daily and weekly schedule
Schedule features (daily and weekly) make it easier to manage the device. The two period schedules cannot be synchronized and are used separately. Up to 6 events can be set within daily schedule.
Automatic temperature switch
Modern weather-dependent automation switches water degree when the outdoor air degree increases or decreases. This is done for rapid weather adaptation and maintenance of optimal ratio between the indoor and outdoor temperature. There are 32 fixed and 1 individual weather and temperature set points.
Power limit feature
The heat pump system may be used with various power sources. Eight different power levels are available in menu. Selection procedure is simple and requires a short setup using the wired remote control.
Holiday away mode
To avoid freezing in cold climate or season, improve system reliability and save energy – the Holiday away mode is activated when leave. It might be heating mode and / or HWS mode – maintaining water temperature stable low but non-freezing.